Keep your bike safe and secure by adding an extra layer of security to deter thieves with the Steadyrack D-Lock and Cable.
Mantenga su bicicleta segura agregando una capa adicional de seguridad para disuadir a los ladrones con Steadyrack D-Lock and Cable.
Compatible con casi todas las bicicletas, puede conectar el D-Lock y el cable (o solo el D-Lock) a cualquier soporte para bicicletas seguro, incluido nuestro Steadyrack. El D-Lock está fabricado en aleación de acero con revestimiento de silicona y viene con un cable de 1,8 m fabricado en alambre de acero, con 3 llaves incluidas.
JOIN WAITLISTProvide us your email. We’ll contact you when this item becomes available again.
SAFE & SECURE
A Steadyrack paired with our sturdy D Lock & Cable will keep your bike safe and secure.
How It Works With Steadyrack
Our Steadyrack D-Lock and 1.8m included Cable means you can lock up your entire bike securely. Simply thread the cable through your bike - frame, wheels or the arms of your Steadyrack and the D-Lock through the loops on the ends of the cable. You can also choose to use the D Lock on its own through your frame or wheels and the Steadyrack. Clip the D-Lock together and turn the key to secure. You can tell that it's locked when you can take the key out. To unlock, simply insert your key and turn to unlock the D-Lock. Too easy!
Our locks and cables are designed to deter opportunistic theft. If they are used in unattended highly visible private or public spaces they will not be effective at preventing theft by a professional with sophisticated tools or equipment. Where possible the included D Lock should also be looped through the bike’s wheel and the rack to further deter thieves. We strongly advise that you do not leave your bikes in a public, vulnerable locations even when locked.
The racks are installed and working well. The fender racks aren’t the best, because you can’t just roll front wheel in, the fender gets caught. For fender bikes, you have to lift and drop in and these are some of my heaviest bikes. Install basics are fine, but you have to remove the plastic ends caps and reinstalling those caps was way more difficult than it should be.
SN
Steadyrack NA
8 months ago
Hi Scott, thanks for your feedback! We can see in your image that the black nylon fender saddle is sitting on the outside and is resting on the fender. This is supposed to sit in between the fender and the tyre, and the rack arms flex and slide between the fender stays. If there is the required 20mm / 3/4 inch clearance, this should slide straight into place! If you need any further assistance on this, please reach out and we would be more than happy to assist.
T
Tim
Verified Buyer
I do not recommend this product
Rated 1 out of 5 stars
11 hours ago
Only for use in Garage
I purchased a steady rack a few months back but never got around to using the D-lock. They sold it as an add on and I needed a new lock…but, it is only for use in a garage and doesn’t mount anywhere onto the bike.
Buyer Beware. They need a disclaimer os something.
Now they say I am outside of the 30 day return window (my bad) and I have a useless D-Lock.
What a pointless product
SN
Steadyrack NA
22 seconds ago
Hi Tim, thank you for your feedback. Our D Lock and Cable can be used with the rack without any additional components! You just need to thread the cable through the frame, wheels, and rack arms and lock it. Our lock is designed to deter opportunistic theft and whilst it does provide a high level of security, professional theft using sophisticated tools or equipment can still occur. For a higher level of security, you can loop the D lock itself through the bike wheel and the rack arm where possible. We hope this helps you with using your D Lock!
GK
Gavin K.
Verified Buyer
I recommend this product
Rated 5 out of 5 stars
8 months ago
Fit for purpose
The lock that is received is very easy to use and enables me to loop through both wheels , frame and the anchor I have chosen
Product QualityRated 4.0 on a scale of 1 to 5
Low High
RP
Rick P.
Verified Buyer
I recommend this product
Rated 5 out of 5 stars
9 months ago
Nice extra bit o security
Hey, this came free with my 4 rack purchase. Can’t beat that. Good quality product.
SP
Steven P.
Verified Buyer
I recommend this product
Rated 5 out of 5 stars
1 year ago
d-lock
I received the D-lock as a "gift" with my recent Steadyrack purchase. The quality of the lock and cable impressed me.
Product QualityRated 5.0 on a scale of 1 to 5
Low High
Loading...
Loading...
Common Questions
Hanging a bike in a Steadyrack will not cause any damage to your frame, forks or wheels. No part of the bike frame touches the rack, only the front tire, which is cradled in the steel arms.
Yes! This is a common concern for many bike owners with these types of brakes and suspension. When your bike is hung up vertically, the fluid in your forks will run towards the seals and keep them lubricated. This will prolong their use, so it's actually good for your bike and forks to hang it vertically on our bike racks. If you have hydraulic brakes on your bike the fluid will run down when the bike is hung, so we advise pumping the brakes a few times when you take the bike off the rack if it's been there for a while. The shocks shouldn't leak when the bike is hung up, however if they do it's a good indication that the seals may need replacing. Read ourblog post for more information about storing bikes with hydraulic brakes in Steadyracks.
Yes - all our racks are compatible with most types of locks, including chain, cable and D-locks. We have introduced alock bracketandD lock and cablewhich is available for purchase on our website. It is also important that you do not rely on the rack arms, as the bolts holding these to the rack frame can be undone.
Yes – all five of our racks pivot up to the left and right.
No, it's not possible to lock the rack solid in one position. You can tighten the nuts sufficiently that the rack will be very hard to pivot which will effectively hold it in the one position. To do this you need to remove the 2 plastic mounting bracket covers (end caps) and tightening the 2 nuts that attach the central pivot bar to the mounting brackets. We recommend you check your fixings to your wall carefully and make sure they are very secure if you do this as any pressure sideways will put extreme pressure on the mounting brackets fixings.